What to Know About Garage Door Panel Replacement

If your garage door panel is broken, it’s important to know how to replace it. While it may seem like a daunting task, it’s a relatively easy process.  

In this article, we’ll provide you with tips to help make the process easier and less time-consuming. We’ll also give you an idea of what materials you will need and how long the project should take. 

What is a Garage Door Panel?

The garage door panel is the section of your garage door that contains the windows. It’s also the part of the door that’s most susceptible to damage, since it’s on the front of the garage and exposed to the elements. If your garage door panel is damaged, it can cause problems with opening and closing your garage door, as well as making your garage door look unsightly. In some cases, you may be able to repair the damage yourself, but in other cases, you’ll need to replace the entire garage door panel. 

When to Replace Garage Door Panel

If your garage door panel is severely damaged, it’s best to replace it rather than try to repair it. garage door repair companies can help you determine if your garage door panel needs to be replaced or if it can be repaired. 

Tips for Replacing Garage Door Panels

Replacing a garage door panel is a relatively easy process, but it’s one that requires some care and precision. Here are a few tips to help you get the job done right. 

Prep Work

Make sure you have all of the materials you need before starting. You’ll likely need a drill, screwdriver, level, tape measure and socket wrench set. Shut off the power to your garage door opener (and remove the garage door opener if possible). This will help prevent any accidents while you’re working. 

Removing Door Panel

Remove the screws that hold the garage door panel in place. There may be anywhere from one to four screws, depending on your garage door model. Once the screws are removed, carefully lift up on the garage door panel and remove it from the tracks. 

Replacing Panel

If you’re replacing a damaged garage door panel with a new one, make sure the new panel is the same size as the old one. If it’s not, you’ll need to cut it to fit. Align the garage door panel with the tracks and replace the screws that hold it in place. Make sure it’s level before tightening them down. 

Reattaching Door Opener

If your garage door opener was removed, reattach it now. Reconnect the garage door opener to the power source and test it out to make sure it’s working properly. Be sure to test your garage door to make sure it’s opening and closing properly. 

When to Use a Professional

There are some garage door repair tasks that are best left to professionals. If you’re not comfortable replacing your garage door panel, or if the damage is too severe, be sure to call a garage door repair company for assistance. They can help you determine if the damage is severe enough to warrant replacement and walk you through the process.  

Final Thoughts

Replacing a garage door panel is a relatively easy process, but it’s one that should be done with care. By following these tips, you can ensure that your garage door panel is replaced correctly and safely. 

KEEP READING: 5 Garage Workshop Organization Ideas